Inscriere cercetatori

Site nou !

Daca nu va puteti recupera parola (sau aveti alte probleme), scrieti-ne la pagina de contact. Situl vechi se gaseste la adresa old.ad-astra.ro

Facebook

Heat exchangers tube to tube sheet joints corrosion behavior

Domenii publicaţii > Stiinte ingineresti + Tipuri publicaţii > Articol în volumul unei conferinţe

Autori: Iancu, M., Ripeanu, R.G., Tudor, I.

Editorial: Branko Ivkovic, Serbian Tribology Society, Proceedings of the 12th International Conference on Tribology, SERBIATRIB’11, p.51-55, 2011.

Rezumat:

Paper presents the studies made by the authors above the tube to tube sheet fittings of heat exchanger with fixed covers from hydrofining oil reforming unit. Tube fittings are critical zones for heat exchangers failures. On a device made from material tube and tube sheet at real joints dimensions were establish axial compression force and traction force at which tube is extracted from expanded joint. Were used two shapes joints with two types of fittings surfaces, one with smooth hole of tube sheet and other in which on boring surface we made a groove. From extracted expanded tube zones were made samples for corrosion tests in order to establish the corrosion rate, corrosion potential and corrosion current in working mediums such as hydrofining oil and industrial water at different temperatures.
The corrosion rate values and the temperature influence are important to evaluate joints durability and also the results obtained shows that the boring tube sheet shape with a groove on hole tube shape presents a better corrosion behavior then the shape with smooth hole tube sheet

Cuvinte cheie: tube to tube sheet fittings, stress, corrosion rate, hydrofining oil, temperature

URL: http://http://www.serbiatrib.mfkg.rs/proceedings.pdf